PBU
The PBU Panel is an exposed fastener system that can be used both horizontally and vertically in wall applications. It can be installed directly over purlins or joists, giving designers a contemporary aesthetic for their building project. The PBU panel is 36” wide with symmetrical ¾” high ribs 6” on centers.
Profile Width | 7.2: Traditional high-rib pattern at 7.2″ o.c. PBR: 1¼” rib height at 12″ o.c. PBU: ¾” rib height at 6″ o.c. |
Width | 36″ |
Length | 5′-0″ to 50′-0″ |
Exterior Face | AZ-50 aluminum-zinc coated steel in 26, 24 and 22 Ga. |
Standard Exterior | Full-Strength 70% PVDF Fluoropolymer Coating or Siliconized Polyester Coating |
Finishes & Colors | Please see Color Chart below for all available colors. |
Fastening | Exposed Fastening System |
Design Features and Benefits
- The PBU Panel is an exposed fastener system that can be used both horizontally and vertically in wall applications.
- PBU Panel can be installed directly over purlins or joists and gives designers a contemporary aesthetic for their building project
Colors
ICI Color Chart


1. Metallic paint finishes will exhibit color shift, shade variances, striations and longitudinal patterning that are inherent characteristics and are not a product defect or cause for rejection.
2. All Metl-Span colors are formulated to provide maximum energy-efficiency and solar reflectivity. All standard available Premium I and Premium II colors have been formulated for maximum solar reflectance.
3. Prices vary by color, gauge and quantity of metal. Please contact your Metl-Span representative for complete information.
4. All colors shown are approximate actual finish colors displayed as accurately as possible.
5. Light Stone – Tuff Cote® does not match the Light Stone – Standard SP color offering.
Download Our Literature
Metl-Span® Exposed Fastener Single-Skin Wall Panel
2012 Master Format™ Section 07 42 13.19
All specifications and designs are subject to change without notice.
Load Span Tables
The Load Span Tables below are based on Allowable Stress Design (ASD). For loads calculated based on ASCE 7-10 (LRFD), please refer to section 2.4.1 of ASCE 7-10 for the applicable load combinations using Allowable Stress Design.
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Have Questions About Our Products?
Please fill out the following information and an experienced sales representative will be in contact. We look forward to hearing from you!
View our Privacy Policy